Installation for 2012-2015 Tacoma: V2W LED Light
Product spotlight: V2W LED Light
The V2W LED Light is a compact, durable, and extremely useful ambient / accent light designed specifically for the second generation TOYOTA Tacoma. In fact, it is the very reason FLYZEYE Designs LLC. was established in the first place.
The V2W is a dual-power, dual color, dimmable unit that is wired into the vehicle's lighting circuit.
The V2W uses a 3-position slide switch to select between: OFF / Primary / Secondary LED colors. The halo illumination is simply the lighted rings that support the Touch-Sensitive Dimming Contacts (TSDC). When dismounted, the unit automatically switches to onboard batteries for remote lighting. Typical battery life runs over several years with normal use. Battery replacement is very simple - the unit is magnetically mounted with (10) Neodymium rare-earth magnets to a sturdy, 0.062" thick FR4 mounting plate.
The primary benefit to the V2W is automation - it is controlled by the vehicle when properly installed and therefore, requires no input to turn off the unit when exiting the vehicle. This unit requires basic wiring installation skills and takes about 15 minutes.
These units are pridefully, hand-assembled in the USA and backed by our satisfaction guarantee.
The V1 and V2W LED lights use a field-effect transistor biasing circuit to increase and decrease the luminous intensity of the Primary and Secondary LEDs. On the V2W, the primary dimming is achieved by adjusting the vehicle's dimmer.
Both units use machined polycarbonate HALOs to isolate and illuminate the touch-sensitive dimming contacts (TSDC) and illuminated with (2) 3mm LEDs mounted inside the unit.
Available LED colors are: Red, Green, Blue, Amber, and White. The HALO color must be selected when ordering custom colored units.
P r e c i s i o n E n g i n e e r e d L i g h t i n g
" L e t ' s E l i m i n a t e D a r k n e s s . . . "
COPYRIGHT (C) 2019 FLYZEYE DESIGNS, LLC.
ALL RIGHTS RESERVED